In accordance with §11 PAngV (German ordinance regulating the indication of Prices), the last offer price shows the lowest price of the last 30 days after all usual direct discount deductions. Discounts such as cashback or trade-in, which are calculated or paid out after the purchase or by third parties without a contractual relationship with Hifi Foto Koch GmbH (service providers, agencies, manufacturers, etc.) or which require further action, are not included.
Leofoto Ranger LS-224C carbon tripod with LH-25 ball head
The lightweight Leofoto Ranger LS-224C carbon tripod is the bigger brother of the very short and therefore particularly pocketable LS-223C. Its pack size of 485 mm is already considerably longer, but by no means unwieldy. However, longer packing dimensions generally allow greater working heights, in this case up to 1,170 mm (without attachable center column). This carbon tripod is ready for immediate use because it comes in a set with a Leofoto LH-25 ball head, screw-on and adjustable center column and multi-tool. The maximum load capacity of the tripod and ball head is 6 kg each. This is sufficient for a DSLR camera with a medium telephoto zoom. The LS-224C carbon tripod (715 g) and the LH-25 ball head (172 g) are so light, even including accessories, that they prove to be ideal companions for photo tours in the great outdoors.
Leofoto Ranger series - the ultra-light but extremely stable carbon tripods
Nature is practically the nature of the compact and lightweight Leofoto Ranger tripods. Every gram and every millimetre counts on days of photo stalking in order to minimize the volume and weight of your luggage. However, all pieces of equipment must not only save space and weight, but also meet very high requirements. Stability under all circumstances, that is the requirement. The material, carbon, ensures the required lightness. Its stability and freedom from vibration "grows" with the number of layers. Apart from the Traveler tripod series and the monopods, Leofoto tripods are made of ten-layer carbon. The deliberately modular design of all tripods in the Leofoto Ranger series - the center column is not built in, but only attached when required - makes it possible to limit luggage to the bare essentials.
With their small diameters, the head plates in the Ranger series are also part of the space-saving concept. And because they are CNC-milled from strong aircraft aluminum, they fit perfectly. The head plate screw has a 3/8" thread. The tripod legs - each consisting of three to five leg elements, depending on the model - glide smoothly and without twisting. They are held in place by rubberized twist locks that are easy to grip. Unwanted vibrations are absorbed by the rubber feet.
Leofoto Ranger LS-224C carbon tripod - compact, therefore ideal for on the go
It is not at all impractical that such a lightweight tripod does not have a built-in center column. It is included in the set and can be screwed on if required. But sometimes you only want to travel with the minimum of photographic equipment. However, the center column included in the set increases the working height of the Ranger LS-224C carbon tripod by up to 325 mm - from 1,170 mm to 1,495 mm. On the other hand, the legs of the Ranger LS-224 carbon tripod can even be spread out so far that a working height of a flat 135 mm is achieved - a perfect base for macro photography just above the ground. The tripod legs each consist of four segments with diameters of 22, 19, 16 and 13 mm.
Leofoto LH-25 ball head - very small, but powerful and precise
This small ball head is precisely manufactured from CNC-milled, black anodized aircraft aluminium and comes with a built-in spirit level. The power of this "flyweight" (only 172 grams) is not immediately apparent. However, the Leofoto LH-25 ball head "lifts" a very decent 6 kg load! The low height of only 67 mm keeps the center of gravity low. This also reduces unwanted vibrations. With a 3/8" tripod thread and a large wing nut, the latter for locking the ball (diameter 25 mm) in the desired position. Velvety-soft adjustment and smooth-running 360° panorama function. The scale on the tripod plate facilitates precise adjustment. Vertical tilting of the ball is possible up to 90°. Attaching and removing cameras is a breeze with the built-in quick-release coupling including PU-25 QR camera plate of the Arca-Swiss type.
Leofoto Ranger LS-224C carbon tripod with LH-25 ball head
The lightweight Leofoto Ranger LS-224C carbon tripod is the bigger brother of the very short and therefore particularly pocketable LS-223C. Its pack size of 485 mm is already considerably longer, but by no means unwieldy. However, longer packing dimensions generally allow greater working heights, in this case up to 1,170 mm (without attachable center column). This carbon tripod is ready for immediate use because it comes in a set with a Leofoto LH-25 ball head, screw-on and adjustable center column and multi-tool. The maximum load capacity of the tripod and ball head is 6 kg each. This is sufficient for a DSLR camera with a medium telephoto zoom. The LS-224C carbon tripod (715 g) and the LH-25 ball head (172 g) are so light, even including accessories, that they prove to be ideal companions for photo tours in the great outdoors.
Leofoto Ranger series - the ultra-light but extremely stable carbon tripods
Nature is practically the nature of the compact and lightweight Leofoto Ranger tripods. Every gram and every millimetre counts on days of photo stalking in order to minimize the volume and weight of your luggage. However, all pieces of equipment must not only save space and weight, but also meet very high requirements. Stability under all circumstances, that is the requirement. The material, carbon, ensures the required lightness. Its stability and freedom from vibration "grows" with the number of layers. Apart from the Traveler tripod series and the monopods, Leofoto tripods are made of ten-layer carbon. The deliberately modular design of all tripods in the Leofoto Ranger series - the center column is not built in, but only attached when required - makes it possible to limit luggage to the bare essentials.
With their small diameters, the head plates in the Ranger series are also part of the space-saving concept. And because they are CNC-milled from strong aircraft aluminum, they fit perfectly. The head plate screw has a 3/8" thread. The tripod legs - each consisting of three to five leg elements, depending on the model - glide smoothly and without twisting. They are held in place by rubberized twist locks that are easy to grip. Unwanted vibrations are absorbed by the rubber feet.
Leofoto Ranger LS-224C carbon tripod - compact, therefore ideal for on the go
It is not at all impractical that such a lightweight tripod does not have a built-in center column. It is included in the set and can be screwed on if required. But sometimes you only want to travel with the minimum of photographic equipment. However, the center column included in the set increases the working height of the Ranger LS-224C carbon tripod by up to 325 mm - from 1,170 mm to 1,495 mm. On the other hand, the legs of the Ranger LS-224 carbon tripod can even be spread out so far that a working height of a flat 135 mm is achieved - a perfect base for macro photography just above the ground. The tripod legs each consist of four segments with diameters of 22, 19, 16 and 13 mm.
Leofoto LH-25 ball head - very small, but powerful and precise
This small ball head is precisely manufactured from CNC-milled, black anodized aircraft aluminium and comes with a built-in spirit level. The power of this "flyweight" (only 172 grams) is not immediately apparent. However, the Leofoto LH-25 ball head "lifts" a very decent 6 kg load! The low height of only 67 mm keeps the center of gravity low. This also reduces unwanted vibrations. With a 3/8" tripod thread and a large wing nut, the latter for locking the ball (diameter 25 mm) in the desired position. Velvety-soft adjustment and smooth-running 360° panorama function. The scale on the tripod plate facilitates precise adjustment. Vertical tilting of the ball is possible up to 90°. Attaching and removing cameras is a breeze with the built-in quick-release coupling including PU-25 QR camera plate of the Arca-Swiss type.
When creating your customer opinion and/or uploading media (e.g. images, videos, audio files, texts, documents, etc.), please observe our guidelines:
Each customer opinion is editorially checked before publication. Please ensure, among other things, that
By submitting your customer opinion and/or uploading media, you agree to these guidelines and terms of use.
These terms of use apply to the participation in and use of the customer ratings of Hifi Foto Koch GmbH. In the event of conflicts with the general terms and conditions or data protection regulations, these terms of use shall take precedence.
By submitting a customer rating and/or an upload of media (e.g. pictures, videos, audio files, texts, documents etc.) you assure that
You provide your content free of charge and are not entitled to any form of remuneration or compensation. There is no entitlement to publication.
Submitted customer opinions and uploaded media are usually reviewed and published within a few working days. All transferable rights of use of the content provided by you are transferred to Hifi Foto Koch GmbH and its current or future partners and representatives (including but not limited to affiliated companies, service providers, search engines, employees, agencies, branches, joint ventures, suppliers). The content may be used, modified and published by the aforementioned parties at their own discretion without any restrictions in terms of time, content and location. Promotional use is also permitted. The content may be edited or deleted if it violates the guidelines for ratings and community media as well as these terms of use or if it makes sense for the respective purpose. It is also possible to shorten the content at any time and without giving reasons.
Hifi Foto Koch GmbH and its current or future partners and agents do not warrant the ability to modify or delete the content you submit, should you wish to do so.
You transfer the rights and licence of your content to Hifi Foto Koch GmbH and its current or future partners and representatives. You grant Hifi Foto Koch GmbH and its current or future partners and representatives, the unrestricted right to your customer opinion (rating text, nickname, star rating, recommendation, etc.) as well as to your media (e.g. images, videos, audio files, texts, documents, etc.; incl. the indication of the author, description, etc.) to use, change, store, delete, shorten, modify, adapt, translate, copy, pass on, sell and distribute worldwide in any form, any medium, in any technology. Personal data (e-mail address, address, contact details) will not be passed on to third parties.
You assume full responsibility for your content. You agree to indemnify Hifi Foto Koch GmbH and its current or future affiliates and agents for all costs, including attorneys' fees, any damages, consequential damages of any kind, claims and demands arising from your failure to comply with the Review and Community Media Guidelines and these Terms of Use.
By submitting your customer opinion and/or uploading media, you agree to the Review and Community Media Guidelines and Terms of Use. By providing your email address, you agree that Hifi Foto Koch GmbH and its current or future partners and agents may send you status information of your customer opinion by email.
Data protection notice
When using the homepage including the submission of ratings and the upload of media, so-called personal data is processed by HiFi Foto Koch GmbH in the sense of Article 6 paragraph 1 DSGVO. Personal data is information that can be directly or indirectly assigned to you or can be assigned to you. In addition to the information entered by you, such as the name, e-mail and description, this data can also be data related to your customer account, IP addresses, access times, accessed URL, sources, browsers used, operating systems and devices, the name of your access provider as well as others. A full overview of data processing and privacy information can be found at https://www.fotokoch.es/privacy.html.